Electric Boat Doors Drive Motor M1502
Product Details
M1502 Series – Electric Door Actuator Motors for Yachts, Drive Wheel Motors for Lawn Mowers, and Chassis Motors for Camera Dollies & Mobile Robots
|
Ultra-low noise, high precision, and zero backlash ensure quiet and accurate operation. The direct-drive system delivers fast response with zero latency. Long service life is achieved thanks to high-quality bearings, while the compact structure allows for a large hollow shaft design. The simple, highly integrated design uses relatively few components, eliminates mechanical friction in the transmission, and achieves a transmission efficiency close to 100%. |
|
|
Dimension Drawing(Model 1)
Dimension Drawing(Model 2)
Motor Technical Parameters
| Parameter | Unit | Model 1 | Model 2 |
| Overall Dimension | mm | Φ187×52 | Φ144×41.83 |
| Rated Voltage | VDC | 24 | 24 |
| Rated Power | W | 110 | 20 |
| Rated Torque | N·m | 9.6 (S2 Duty Cycle) | 2 |
| Stall Torque | N·m | 17 | 10 |
| Rated Speed | rpm | 115 | 95 |
| No-load Speed | rpm | 200 | 210 |
| Rated Current | A | 11.5 | 1.5 |
| Stall Current | A | 21 | 17 |
| Module Mass | g | 3000 | 1860 |
| Noise Level | dB | ≤52 | ≤52 |
| Encoder Resolution | bit | 14 | 14 |
| Communication Protocol | — | CAN Bus | CAN Bus |
| IP Rating | — | IP55 | IP65 |
| Insulation Class | — | B | B |
| Withstand Voltage | VAC/Hz | 600/50 | 600/50 |
| Operating Temp. | ℃ | -20~45 | -20~45 |
| Operating Humidity | % | ＜85 | ＜85 |
| Storage Temp. | ℃ | -20~65 | -20~65 |
| Storage Humidity | % | ＜85 | ＜85 |
Motor Characteristic Curve(Model 1)
Motor Characteristic Curve(Model 1)
-
Gear Hob Tools Series
Timing Pulley Hobs – The Professional Choice for Precision Synchronous Pulley Machining Timing pulley hobs are dedicated cutting tools designed for machining synchronous pulleys, toothed belts, and other belt-drive components. Sharing the same generating principle as gear hobs, they are specifically ... -
Broaching Tools
Hex and Open-End Broaches – Specialized Tools for Precision Machining of Wrench Head Cavities Hex and open-end broaches are specialized push-broaching tools designed for machining the internal cavities (hexagonal or open-end profiles) of combination wrenches, open-end wrenches, and box wrenches, ... -
CNC Cutting Tools Series
Form Milling Cutters – Specialized Tools for the Pliers Manufacturing Industry Form milling cutters are specialized milling tools designed for the manufacturing of hand pliers, widely used in machining the jaw profiles and external contours of combination pliers, long‑nose pliers, diagonal cutting ... -
Indexable High‑Speed Slotting Tools
GM16.1 Indexable High‑Speed Slotting Tools – Professional Solutions for Efficient Slotting of Longitudinal Slots, Hexagons, and Internal Splines The GM16.1 indexable high‑speed slotting tool is a versatile indexable cutting tool specifically designed for lathes, machining centers, and high‑speed ...
